Electric Power Construction Safety Tips

As a construction enterprise of electric power construction, the safety of construction machinery and tools plays a decisive role in the completion of production tasks. Construction machinery and tools are also one of the essential conditions for completing production tasks. In order to meet the needs of the development of electric power construction, to ensure the purchase, repair and use of machinery and tools, and to ensure safety during construction, let us understand the following A few key points:

1. Types of machinery and tools:

1.1 Construction vehicles (excluding automobiles and cranes) traction and tension vehicles.

1.2 Lifting Tools: mainly refers to Tools for conversion and transfer.

1.3 Gasoline, diesel, and electric tools: mainly refer to construction machinery and tools that use gasoline, diesel, and electric energy as energy sources.

1.4 High-altitude tools: mainly refer to support and protection tools for high-altitude construction.

1.5 Special safety tools or equipment, important labor protection articles.

1.6 Insulated tools.

2. The purchase of machinery and tools and its basis :

2.1 The purchase of machinery and tools must be approved by the leader and carried out according to the plan.

2.2 The manufacturer must be a state-owned enterprise or a well-known and reputable manufacturer.

2.3 The manufacturer must supply the country's product appraisal report and production license

Certificates, instruction manuals, and various technical standards for products.

2.4 The purchased large-scale machinery manufacturer should have a punctual after-sales service team.

3. Acceptance and testing of machinery and tools:

3.1 Check that the nameplate is consistent with the shape and size.

3.2 Appearance inspection: visually pass inspection one by one.

3.3 Life and reliability inspection: check vulnerable parts, security devices, etc.

4. Performance test inspection, sampling ratio and key inspection items Inspection items:

4.1 Construction vehicles: traction equipment should be subjected to rated load, start-up, brake tests, and cycle tests if necessary.

4.2 Lifting tools: Sampling 4-8%, respectively do 100% and 125% working tests under the rated compliance conditions to check whether there is any deformation or other abnormal phenomena in the external dimensions. 4.3 Gasoline, diesel, electric tools: Sampling 3-6% for rated load test, start and stop several times, check whether it is over-temperature and use reliability. 4.4 High-altitude tools: The rated load test should be carried out to check the weak links and service life.

5. All tests should be carried out according to the specified cycle, with the participation of safety supervisors, and records should be made.

6. Large-scale machinery and equipment must undergo necessary training before they are put into use, and the management and repair of machinery and tools should be strengthened after use. Each team should also report to the company's security department and technical quality department on time for any problems that arise during use, so that they can be studied and dealt with on time. Ensure personal and equipment safety and project progress.

7. Use and maintenance of machinery and tools:

7.1 The management departments of machinery and tools in various places are fully responsible for the safety of machinery and tools.

8.The released tools must ensure 100% integrity rate, otherwise they cannot be released. The distribution record should be used before distribution, and it should be repaired and maintained on time after return.

8.1When the project departments and teams receive the tools, in addition to filling in the records, they should also concentrate on checking the appearance of the tools and accepting them.

It can be used later, and the appearance inspection of the tools and utensils used should be carried out before daily work to eliminate hidden dangers in time. 7.3 Each project department, pair and class

In addition to the daily visual inspection of the tools and appliances in the group, the tools and appliances used should also be inspected and maintained once a month. Ensure that the tools used are in a qualified state. At the same time, repair records should be established. 7.4 For all kinds of safety phenomena that occur within the scope of use of machinery and tools, the responsibility of the distribution and repair personnel must be investigated.

To support the Transmission work, Marshine Power has Tubular Gin Pole, Hydraulic Cable Puller, Wire Rope Pulley Block, Hoisting Tackle, Wire rope gripper, Cable reel spool and stand- all are OEM and professionally produced per ISO 9001:2008, which are being sold to over more than 50 countries in the world. Some items like Emergency Restoration Tower And Crossing Structure, we can customized, and the Safety Tools And Accessories, are not demanded the MOQ. You can freely help you out either Tech issue or Products requirements. Pls approach us. Thanks.