Steel Cable Guide Rollers

CR6 Nine vertical steel rollers

• Brand: MARSHINE
• Packaging: Carton or customization
• Supply Ability: 3000pcs/month
• Min. Order: 5 Piece/Pieces

CR6 Vertical Roller Nine vertical steel rollers each running in roller bearings and mounted in a heavy duty steel frame. Note: These rollers are used in conjunction with CR5 as per the photograph and where large diameter cables have a limited bend radius.

Contact Now

Corner Ground Steel Roller Corner Turning Roller

• Brand: MARSHINE
• Packaging: Carton or customization
• Supply Ability: 3000pcs/month
• Min. Order: 5 Piece/Pieces

Corner Ground Steel Roller Corner Turning Roller Our corner ground roller assembly is designed with three rollers. In accordance with the requirement, multiple assembly sets can be combined together to form arbitrary turning angle. The model with 'N' represents nylon roller. Technical Parameters Item number Model...

Contact Now

DR1 Draw Off Cable Roller

• Brand: MARSHINE
• Packaging: Carton or customization
• Supply Ability: 3000pcs/month
• Min. Order: 5 Piece/Pieces

DR1 Draw Off Roller To lead the cable directly from the drum into the trench. 75mm diameter steel tube roller on low friction sintered bushes. All mounted to heavy duty angle steel base.

Contact Now

SR5 Suspension Roller Suspended in High Buildings

• Brand: MARSHINE
• Packaging: Carton or customization
• Supply Ability: 3000pcs/month
• Min. Order: 5 Piece/Pieces

SR5 Suspension Roller Suspended in High Buildings To enable cables to be winched and suspended in high buildings prior to being positioned on gantries, beams etc. Zinc plated finish Specifications Height 404mm Width 240mm

Contact Now

Cable Drum Rollers For Sale Wire Pulling Rollers

• Brand: MARSHINE
• Packaging: Carton or customization
• Supply Ability: 3000pcs/month
• Min. Order: 5 Piece/Pieces

Cable Drum Rollers For Sale Wire Pulling Rollers Our corner ground roller assembly is designed with three rollers. In accordance with the requirement, multiple assembly sets can be combined together to form arbitrary turning angle. The model with 'N' represents nylon roller. Technical Parameters Item number Model...

Contact Now

Best Quality Wire Pulling Sheave

• Brand: MARSHINE
• Packaging: Carton or customization
• Supply Ability: 3000pcs/month
• Min. Order: 5 Piece/Pieces

Best Quality Wire Pulling Sheave Our cable ground roller comes with the cast aluminum support. The model with 'N' refers to the nylon roller, while the other presents the aluminum roller. Product Table Item number Model Rotated load (kN) Applicable cable diameter(mm) Weight (kg) 21181 SHL1B 5

Contact Now

Cable Ground Pulling Roller

• Brand: MARSHINE
• Packaging: Industry packing
• Supply Ability: 2000pcs/day
• Min. Order: 1 Piece/Pieces

Cable Ground Pulling Roller Specification: Applicable cable diameter is less than 150mm. Packing&Delivery Time 1. Bulk Pack With Wooden Board Carton 2. Delivery time: Within 30 Days After Receiving The Payment Product Specification Item No. Model No. Rated Load

Contact Now

Crossarm Tri-rollers Stringing Block

• Brand: MARSHINE
• Packaging: Carton box
• Supply Ability: 20000PCS/MONTH
• Min. Order: 5 Set/Sets

Crossarm Tri-rollers Stringing Block Our SHL-1A type tri-roller stringing pulley block, and tri-roller cable block, are all crossarm mounted string block, they are mostly used for laying the conductor with small cross section. Its suitable angle iron is less than 90 degrees. Technical Parameters Item number

Contact Now

Three Rolles Radius Cable Sheaves

• Brand: MARSHINE
• Packaging: Carton or customization
• Supply Ability: 3000pcs/month
• Min. Order: 5 Piece/Pieces

Three Rolles Radius Cable Sheaves This C series Three-rollers Radius Cable Sheaves, tray type sheaves is designed with three nylon rollers. Its curvature radius is 450mm. The roller is lockable. According to the traction requirement, it can be put at the orifice from any angle. Production Specifications

Contact Now

Quadrant Lead in Cable Roller

• Brand: MARSHINE
• Packaging: Carton or customization
• Supply Ability: 3000pcs/month
• Min. Order: 5 Piece/Pieces

Quadrant Lead in Cable Roller Our C1 series Quadrant Lead In Cable Roller, four-rollers tension roller and four-rollers manhole roller possesses the curvature radius of 1000mm. This assembly comes with four nylon rollers, which are lockable and can be placed in tube orifice at arbitrary angle. Technical Parameters

Contact Now

Underground Conduit Cable Rollers

• Brand: MARSHINE
• Packaging: Carton or customization
• Supply Ability: 3000pcs/month
• Min. Order: 5 Piece/Pieces

Underground Conduit Cable Rollers ground tube rollers is a equipment for laying,pulling,guiding and protecting cable/rope/wire,which is a great way to save time and money. It is aslo called cable pulleys,cable sheaves and so on.Our cable roller often made of nylon and aluminium two materials,the frame is often made of...

Contact Now

Heavy Duty Cable Rollers For Protect Cable

• Brand: MARSHINE
• Packaging: Wooden Case
• Supply Ability: 3000PCS/MONTH
• Min. Order: 5 Set/Sets

Heavy Duty Cable Rollers For Protect Cable Nylon or aluminum wheel pithead cable roller SHH dia 140*200mm for protecting cable and pulling rope Notes: 1. Protect the cable and pulling rope. 2. Leaning against the side of pithead directly while using. Data Sheet

Contact Now