Pulley Block And Roller

Model No. : QH

IRON HOISTING TACKLE Our iron hoisting block is widely applicable to the erection of overhead line structures, lifting equipment, and other hoisting operations. This product is classified as hook style (G), ring style (H), or clevis style (B). Thus,...

 Click for details

Model No. : SH10TY

Universal Stringing Block This universal steel stringing block is a versatile product, and the stringing conductor pulley block can be not only fixed on the caliper of cross-arm, but also hung on the round head of insulator string for use. And the...

 Click for details

Model No. : SH130S SH200S

Three-wheel Cable Roller Opening Protection Roller Uses: Use to lay the cable on the ground or cable brigde Characteristic: 1. Use at straight line or corner and it can be disammembled as 3 rollers 2. Nylon

 Click for details

Model No. : SH

Adjustable Narrow Trench Cable Roller Our Narrow Trench Cable Roller, adjustable guide roller and tracing cable roller is used to safeguard the cable at the cable pithead. When for use, it is only needed to lean against the pithead directly....

 Click for details

Model No. : SHS

Dual Sheave Hoisting Tackle This dual sheave hoisting tackle, hook type hoisting tackle,is divided into hook style (G) and ring style (H). Therefore, our customers must clearly explain their required style in the written contract. Moreover, our...

 Click for details

Model No. : QHS

Dual Sheave Hoisting Tackle This dual sheave hoisting tackle, hook type hoisting tackle,is divided into hook style (G) and ring style (H). Therefore, our customers must clearly explain their required style in the written contract. Moreover, our...

 Click for details

Model No. : SHD

Aerial Cable Stringing Roller Model SHD150 Cable String Roller (Aerial) This aerial cable stringing roller weighs 3.6kg and its rated load reaches 10kN. The maximum diameter of cable is 80mm. Our product can be applied to the overhead power line and...

 Click for details

Model No. : QH

Iron Hoisting Block Our iron hoisting block is widely applicable to the erection of overhead line structures, lifting equipment, and other hoisting operations. This product is classified as hook style (G), ring style (H), or clevis style (B). Thus,...

 Click for details

Model No. : SHL-1A

Crossarm Tri-rollers Stringing Block Our SHL-1A type tri-roller stringing pulley block, and tri-roller cable block, are all crossarm mounted string block, they are mostly used for laying the conductor with small cross section. Its suitable angle...

 Click for details

Model No. : SHC

Crossarm Mounted Stringing Pulley Block Crossarm Mounted Stringing Block is used in the power construction. Technical Parameters Item

 Click for details

Model No. : GJ25-70

Adjustable Earthwire Stringing Block Our adjustable earth wire stringing pulley block can be not only used to spread the earth wire, but also utilize the fluctuating screw mandrel to install the accessories. Its item number is 10251 and 10252. Our...

 Click for details

Model No. : QHN

Three Nylon Sheave Wire Lifting Pulley Block This aluminum alloy and MC nylon wire lifting pulley block, triple pulley blcok, are the open type pulley block, it possesses light dead weight, which is equipped with the aluminum alloy side panel and...

 Click for details

Model No. : QHN

Three Nylon Sheave Wire Lifting Pulley Block This aluminum alloy and MC nylon wire lifting pulley block, triple pulley blcok, are the open type pulley block, it possesses light dead weight, which is equipped with the aluminum alloy side panel and...

 Click for details

Model No. : QHGL

Coin Rope Aluminous Hoisting Tackle Coin rope aluminous hoisting tackle, it have three type, twin sheave hoisting tackle and monosheave hoisting tackle, with hook or ring, it rated load can reach to 20Kn, the max outside width is 120diameter mm ....

 Click for details

Model No. : 12131

Striging Equipment Hoisting Point Block Stringing Equipment Hoisting Tackle serves as hoisting point block in multipoint method crane. It is light, easy operation and heavy

 Click for details

Model No. : SHL

Underground Aluminum Cable Roller Our Aluminum cable roller, undergound cable roller, and aluminum roller for pipe laying is designed with the steel pipe support. In the following table, the model without 'N' refers to the aluminum roller, and the...

 Click for details

Model No. : SHDN

Nylon and Steel Single Roller Cable Block Our single roller cable block, stringing cable pulley block is divided into hook, clevis, and other types. The specified type must be clearly indicated in the order form. We can customize the product with...

 Click for details

Model No. : SHDN

Overhead Pulley Series Transmission Blocks Overhead transmission block is the pay off pulley block, this pulley block with three wheels, also can be one ~five wheels, they are useful in power construction. 1. Maximum suitable conductor ACSR1250 2....

 Click for details

Model No. : SHCN

Universal Crossarm Mounted Hook Style Block Universal Crossarm Mounted Hook Style Pulley Block, Pulley Block with Hook and Snatch Pulley Block, its sheave can ve made of nylon and aluminum, which outside dimeter size Max is 120x58mm, rated load is...

 Click for details

Model No. : QH

Single Pulley Snatch Block Snatch Block Sheave Our iron hoisting block is widely applicable to the erection of overhead line structures, lifting equipment, and other hoisting operations. This product is classified as hook style (G), ring style (H),...

 Click for details